Client Dashboard

Company:

Location:

Unit:

Equipment:

Category	Description
1P	MACP less than operating pressure and/or remaining wall is zero.
1S	MACP > design pressure but pipe thickness is less than minimum struct thickness around entire circumference.
1A	Hole in atmospheric equipment (vessels, pipes, tanks, sumps, etc).
1T	All temporary clamps on vessels, pressurized and atmospheric piping; including patches on vessels.
2	MACP less than PSV/relief pressure and more than operating pressure.
3	MACP greater than relief pressure but less than design pressure.
4	MACP > design pressure but has valve/flange leaks or inaccessible corrosion/blistering/pitting or vessels without nameplates or non-pressure retaining issues. Also where less than all 4 quadrants are below struct t-min.
5	MACP > design pressure, but remaining life is less than two years and/or calculated corrosion rate > 30 MPY.

Criticality	Description
Class 1	Risers
Class 2	General
Class 3	Water
Class 4	Vessels
Consequence 1	Vessels
Consequence 2	Vessels
IC2	CC-001
Class 4	Vessel

Critical 1.0	general
Class 1	Risers
INS
II
tanks	tanks
HIL-Class-1	Severe
Class 3	General
Critical 2.0	10 year
Critical 3.0	10 year
Critical 4.0	10 year
Criticality 1	HC Sour Service/Amine
Criticality 2	HC Sour Service
Criticality 3	HC Service
Criticality 4	Utilities
Class 1	Risers
Class 2	General
Class 3	Water
Class 4	Vessels
Class 1	Risers
Class 2	General
Class 3	Water
Class 4	Vessels
Class 1	Risers
Class 2	General
Class 3	Water
Class 4	Vessels
Critical 2.0	10 year
Critical 3.0	10 year
Critical 4.0	10 year
Critical 2.0	10 year
Critical 3.0	10 year
Critical 4.0	10 year
Critical 2.0	10 year
Critical 3.0	10 year
Critical 4.0	10 year
Criticality 1	HC Sour Service/Amine
Criticality 2	HC Sour Service
Criticality 3	HC Service
Criticality 4	Utilities
Criticality 2	HC Sour Service
UT Cal	Annual UT Meter Calibration

Processing.. please wait.